Building Enviornmental Monitoring System With COM

This article presents an implement of component using COM technology for collecting environmental monitoring data in environment monitoring system. The component makes the separation of data collection and data analysis available.Simultaneously by using the interface of connectable object in COM,itmakes the cooperation of the environment monitoring software with other parts of fault management software available,and also the seamless connection.It improves the system's performance by adding extensibility and potential cooperatibility.     

Pinning Theory of Fermi Energy and Surface State Measurement of ZnSnO3 Gas Sensitive Material

In order to research the state of energy bands and gain and loss of electrons on the surface of ZnSnO_(3),it is put forward that Pinning theory of Fermi energy is applied to development of gas sensitive materials.The relative position between surface state and conduction band on surface of zinc tin complex oxide(ZnSnO_(3)) gas sensitive material has been investigated by utilizing oxidation redox couple,FeCl_(2)/ FeCl_(3),which have high surface state.Fermi energy is pinned at about 0.2 eV below conduction band E_(cs)on the surface of ZnSnO_(3).It has been determined that additives doping ratio,addition concentration and working atmosphere have no effect on this value.Therefore,pinning theory of Fermi energy has been verified by using this method.     

CALCULATION OF TNE END-EFFECT FACTOR OF SYNCHRONOUS MOTOR WITH CYLINDRICAL SOLID ROTOR

This paper presents the end-effect factor of Synchronous motor with cylindricalsolid rotor offered by analysing the 3-D electromagnetic field and using the Poynting vector.To ap-ply it in an actual calculation,the end-effect factor is proved correct and applicable.     

Influence of the Flood-Control-Projects on the Hydrodynamic State of the Rivers Confluence in Chongqing

Though the Flood-Control-Projects along Yantze River and Jialing River in Chongqing may well improve the urban traffic and construction,it may change the river hydrodynamic characters.There may be two consequences,one is to reduce the size of cross section and the other is to change the river shape,such as the curvature radius.The phenomena of the local backwater and velocity variety are obvious,which result in some problems for the navigation: sediment,transport and so on.In this paper, the study object is the Flood-Control-Projects and Yangtse River and Jialing River,and the aim is to study the influence of the Flood-Control-Projects on the hydrodynamic state of the two rivers.Using the numerical technique,with the two rivers hydrodynamic model the flow field's change of river after completion of Flood-Control-Projects is simulated and the reasons caused by the change are analyzed.     

Behavior and Design of High-strength Bolt in Tensile Connection

The tensile strength of high strength bolt is affected by many factors, including prying force. The prying force can result in the increment of bolt force, for which the connection failed ahead of time. Several methods are presented for calculating the prying force. In the China's "Code for Design of Steel Structure" (GB50017), there is no formula for calculation of prying force and a factor of 0.8 is considered in formula for tensile strength of bolt for taking the prying force into account. It is proposed that the design value of tensile resistance for high strength bolt should be increased.     

A PRACTICAL METHOD OF DESIGNING WALL BEAMS IN FRAMES

Brick masonry wall-beams in frames are girders,carrying brick masonrywalls in buildings with only one or two storied reinforced concrete frames atthe bottom of it.How to anaIyse and design such an element is an outstand-ing problem.In this case,there are no analytical and designing rules in thestate code in force.Therefore,designers have to seek other methods,in whichmost are very conservative and expensive.In order to change this case,thispaper provides an analytical and practical mathod for designers.     

The Algorithm of Searching out the Least and Most Loops by Making Use of Direction Factor

Based upon the conception of the least loop,the most loop and direction factor presented by the author firstly,the algorithm of searching out the least and most loops has been designed.By building the adjoining matrix, confirming the start-point of searching,vectorizing the searching sides,calculating the direction factor of adjoining sides,we can search out the next side of the least loop or the most loop rapidly.With a valid searching side being confirmed at every searching and the searching scope being reduced by forming degenerate graph,the time compexity of the algorithm is much less. In the research of the automatic calculating system of construction quantities, the problem of houses partition and out-wall partition had been solved succesfully by utilizing this searching algorithm.     

泵站中钢筋混凝土梁加固的变形计算

基于试验研究资料的分析,对于大型泵站中具有合适锚固的CFRP片材加固受弯构件变形计算方法进行研究,认为加固梁的弯矩-曲率曲线符合三线型规律（混凝土开裂前,混凝土开裂后,受拉钢筋屈服后）.通过解析分析,得到试验梁在通常两点加载条件下的任一加载阶段的弯矩及变形计算公式,与相应条件试验梁的试验测试结果吻合,可为泵站工程设计规程的制定提供参考。     

可视化编程技术在发动机外特性曲线绘制中的应用

通过对汽车发动机外特性的理论分析,在处理汽车发动机外特性曲线时,建立了一种适合处理发动机外特性曲线的三次样条函数拟合的数学模型,在C Builder可视化开发平台上,编制了汽车发动机外特性曲线绘制程序.利用三次样条函数插值法对实验数据进行拟合,实现了发动机外特性曲线绘制的自动化.